Documax Datasouth A3300 Series Driver

AMT Datasouth Documax A - printer - monochrome - dot-matrix Series Specs4 Suggested Answers

This will upgrade your ram to k. Printer is double striking the characters.

How would I increase the buffer size on a Documax? We have no specific drivers available for the Documax printer. Documax A printer prints in one place.

Corporate Headquarters Camarillo Springs Rd. The printer will print the profile. The email address entered is already associated to an account.

How do I print out the Printers profile? Try adjusting the detent lever and see if this helps. This will print the current profile only.

If you have replaced the Ribbon and moved the detent Closer and still print is light, most likely printhead is worn. Yours may be different, but should be in that neighborhood.

Documax datasouth a series printer drivers for windows x - Fixya

4 Suggested Answers

How can I expand this memory? If the print out appears to have random black rectangles - the cause is the print head jamming due to a lack of lubrication. This sensor is located in the platen the metal piece that the printhead strikes against. These three features need to be set correctly to make this work.

You could be surprised at what drops out. Look at the platen down where the paper comes up on the left side as you are standing in front of the printer.

The new ribbon installs in the reverse order. How do I set the Top of Form? Are you a Microsoft Computer and Internet Expert?

There are different ways to fix this and it really depends on the application used to print the cards. It's worth a thousand words.

Documax datasouth a series printer drivers for windows x - Fixya

Press enter at that point to save the current settings as the default for that profile. No ribbon or paper in the machine. You can't post conmments that contain an email address. Answer questions, earn points and help others Answer questions. There is no way to set the printer to ignore these software settings.

Just go to Printers, Click Add new printer and choose the driver. These drivers all can be found on the Windows Installation disks. Turn the power off to the printer, c252p printer driver and move the printhead to the right. Any recommendation for lubricants?

Parts of the characters are too light to read? Your answer needs to include more details to help people. This information will help other people in the future. Check the logic board connection.

This causes the carriage plate to stall more, until eventually the carriage plate must be changed. We're glad to hear that your problem had been solved.

Documax datasouth a3300 series printer drivers for windows xp

If you are asking about the mylar shield on the plastic ribbon guide which fits over the printhead, it must stay on the ribbon guide. You will have to set any features that you have changed from factory. You can also try turning the printer upside down and softly tapping it. Your software may be over-riding the printer settings.

Check your printer properties if you are in Windows and make sure of the margin settings both there and in your applications. There is a ram upgrade kit also available from our parts dept. What could be the problem? Yes, the A and all of our dot matrix printers can be connected to both. To Print a Profile Take the printer off-line Open the keypad door.

AMT DatasouthDocumax SDM

Username Password Remember Me. What can be done to prevent this? Serial port set up, what should the settings be? Not finding what you are looking for?

When you close the keypad door after you make changes to the current profile the printer will prompt you to press the Profile key to save the current settings as the new default. The handshaking is really system dependant. Which driver should I use for the Documax printer? More Print this page Share this page. Clean the rails with Denatured Alcohol Only.

How do I perform a Default Reset on a Documax? Try getting in there with a q-tip or blow it out with low pressure compressed air. In addition there should be no more than. The sensor is on the left side of the printer, check it for dirt or for paper blocking it.